Knowledge ·
Ultrasonic flowmeter installation method
Ultrasonic flow meters generally have two probe installation methods, namely Z method and V method.
Ultrasonic flow meters generally have two probe installation methods, namely Z method and V method.
However, when D <200mm and the site situation is one of the following conditions, the Z method can also be used for installation:
1. When the turbidity of the measured fluid is high, the signal cannot be received or the signal is very weak when measured by the V method;
2. When the inner wall of the pipeline is lined;
3. When the service life of the pipeline is too long and the inner wall scales seriously;
For those with better pipeline conditions, even if D is slightly larger than 200mm, in order to improve the measurement accuracy, the V method can be used for installation.
More knowledge.
See all →Industrial wastewater physical treatment method
Through physical action, to separate and recover the insoluble pollutants in the suspended state (including oil film and oil droplets) in the wastewater.
Wastewater classification
The first is classified according to the chemical properties of the main pollutants contained in industrial wastewater.
Development history of industrial wastewater treatment
With the rapid development of industry, the types and quantities of wastewater have increased rapidly, and the pollution of water bodies has become increasingly widespread and serious, threatening human health and…